Moxa EDS-G205A-4POE-1GSFP Installationsanleitung

 2011 Moxa Inc. All rights reserved. P/N: 1802002051020 EDS-G205A-4PoE Hardware Installation Guide Moxa EtherDevice Switch First Editi

- 10 - DIP Switch Setting Description – – Serves no function (reserved for future use). BSP ON Enables broadcast storm protection OFF Disables

- 11 - Auto MDI/MDI-X Connection The Auto MDI/MDI-X function allows users to connect the EDS’s 10/100/1000Base-T(X) ports to any kind of Ethernet d

- 12 - Specifications Technology Standards IEEE 802.3 for 10BaseT, IEEE 802.3u for 100BaseT(X) and 100BaseFX, IEEE 802.3ab for 1000Base-T IEEE 802.

- 13 - EN61000-4-5 (Surge), Level 3 EN61000-4-6 (CS), Level 3 EN61000-4-8 Shock IEC 60068-2-27 Freefall IEC 60068-2-32 Vibration IEC 60068-2-6 WAR

- 2 - Overview The EDS-G205A-4PoE series industrial Ethernet switches are rugged entry-level industrial 5-port gigabit PoE switches that support IEEE

- 3 - EDS-G205A-4PoE (Standard) Panel Layouts 1. Terminal blocks for P1/P2 power inputs 2. Power input P1 LED 3. Power input P2 LED 4. PoE st

- 4 - Mounting Dimensions (unit = mm) DIN-Rail Mounting The aluminum DIN-Rail attachment plate should already be fixed to the back panel of the EDS

- 5 - To remove the EDS from the DIN-Rail, simply reverse Steps 1 and 2 above. Wall Mounting (optional) For some applications, you will find it conve

- 6 - Wiring Requirements WARNING Safety First Turn the power off before disconnecting modules or wires. The correct power supply voltage is listed

- 7 - STEP 1: Insert the negative/positive DC wires into the V-/V+ terminals. STEP 2: To keep the DC wires from pulling loose, use a small flat-bla

- 8 - 1000Base-T Pinouts MDI Port Pinouts MDI-X Port Pinouts 8-pin RJ45 Pin Signal Pin Signal 1 BI_DA+ 1 BI_DB+ 2 BI_DA- 2 BI_DB- 3 BI_DB+ 3 BI_

- 9 - RJ45 (8-pin) to RJ45 (8-pin) Cable Wiring NOTE If the PD only supports PoE MDI mode (V+, V+, V-, V- for pins 1, 2, 3, 6), choose a cross-ove