Moxa NPORT 5650-16-T Installationsanleitung PDF herunterladen (Seite 1)

– 1 – – 2 – – 3 –

P/N: 1802056000211

NPort 5600 Series Quick

Installation Guide

Third Edition, November 2010

1. Overview

Welcome to the Moxa NPort 5600 Series. The NPort 5610-8/16

have 8 or 16 RS-232 ports, the NPort 5630-8/16 have 8 or 16

RS-422/485 ports, and the NPort 5650-8/16 have 8 or 16

RS-232/422/485 ports.

2. Package Checklist

The NPort 5600 package should contain the following items:

• 1 8-port or 16-port serial device server

• NPort Documentation & Software CD

• NPort 5600 Quick Installation Guide

Optional Accessories:

• CBL-RJ45M9-150: 8-pin RJ45 to DB9 male cable, 150 cm

• CBL-RJ45F9-150: 8-pin RJ45 to DB9 female cable, 150 cm

• CBL-RJ45M25-150: 8-pin RJ45 to DB25 male cable, 150 cm

• CBL-RJ45F25-150: 8-pin RJ45 to DB25 female cable, 150 cm

Notify your sales representative if any of the above items is

missing or damaged.

3. Hardware Introduction

The NPort 5600 Series has includes the following models: NPort

5610-8, NPort 5610-16, NPort 5610-8-48V, NPort 5610-16-48V,

NPort 5630-8, NPort 5630-16, NPort 5650-8, NPort 5650-8-T,

NPort 5650-16, NPort 5650-16-T, NPort 5650-8-M-SC, NPort

5650-16-M-SC, NPort 5650-8-S-SC, and NPort 5650-16-S-SC.

NOTE

The wide temperature model does not support LCM display

panel

s or push buttons. All of the LCM descriptions below

apply only to standard temperature models.

The front and rear panels are shown below:

Front panel of the NPort 5600 Series

Rear panel of the NPort 5610/5630/5650 (AC Power)

Rear panel of the NPort 5650 (Fiber Model)

Rear panel of the NPort 5610 (DC Power)

Front panel of the NPort 5650-T Series

Reset Button—press the Reset button continuously for 5 sec to

load factory defaults: Use a pointed object to press the reset

button. Release the button after the Ready LED stops blinking.

LED Indicators on the Front Panel—the front panels of the

NPort 5600 have several LED indicators, as described in the

following table.

Name

Color

Function

Ready

Off

Power is off, or power error condition exists.

Red

Steady on: Power is on and the NPort is

booting up.

Blinking: Indicates an IP conflict, or DHCP or

BOOTP server did not respond properly.

Green

Steady on: Power is on and the NPort is

functioning normally.

Blinking:

The NPort has been located by NPort

Administrator’s Location function.

1-16

Orange

Serial port is receiving data.

Green

Serial port is transmitting data.

Off

No data is being transmitted or received

through the serial port.

LCM Display Panel—If the NPort is working properly, the LCM

panel will display a green color. The red Ready LED will also light

up, indicating that the NPort is receiving power. After the red

Ready LED turns green, you will see a display similar to:

This is where

• NP5610-16 is the NPort’s name

• 38 is the NPort’s serial number

• 192.168.127.254 is the NPort’s IP address

LCM Panel Operation—There are four buttons on the NPort

5600’s front panel. These buttons are used to operate the server’s

LCM panel. Going from left to right, the buttons are:

Button

Action

Activates the main menu, or returns to a lower level.

︿

Scrolls up through a list of items shown on the LCM

panel’s second line.

﹀

Scrolls down through a list of items shown on the LCM

panel’s second line.

SEL Selects the option listed on the LCM panel’s second

line.

Detailed LCM Panel Operating instructions can be found on the

CD-ROM in the NPort 5600 Series User’s Manual.

Link Indicator on the rear panel of the NPort 5650 fiber

model—the rear panels of the NPort 5650 have a link indicator, as

described in the following table.

LED Name

LED Color

LED Function

Link

Off

Fiber disconnected.

Green

Fiber connected; data not transmitting.

Blinking

Fiber connected; data is transmitting.

4. Hardware Installation

STEP 1: After removing the NPort 5600 from the box, the first

thing you should do is attach the power adaptor.

STEP 2: Connecting the Power.

AC: Connect the NPort 5600’s 100-240 VAC power cord to the AC

connector. The “Ready” LED will show a solid red color until the

system is ready, at which time it will change to a green color.

DC: Connect the NPort 5610-16/8-48V’s power cord to the DC

connector, and then follow the steps given below:

Loosen the screws on the V+ and V- terminals of

the NPort 5610-8/16-48V’s terminal block.

Connect the power cord’s 48 VDC or -48 VDC wire

to the terminal block’s V+ terminal, and the power

cord’s DC Power Ground wire to the terminal block’s V- terminal,

and then tighten the terminal block screws. (Note: The NPort

5610-8/16-48V can still operate even if the 48V/-48V and DC

Power Ground are reversed.)

The “Ready” LED will show a solid red color until the system is

ready, at which time it will change to a green color.

Grounding the NPort 5610-8/16-48V:

Grounding and wire routing help limit the effects of

noise due to electromagnetic interference (EMI).

Run the ground connection from the ground

screw to the grounding surface prior to

connecting devices. The Shielded Ground

(sometimes called Protected Ground) contact is

the second contact from the right of the 5-pin power terminal block

connector located on the rear panel of the NPort 5610-8/16-48V.

Connect the SG wire to the Earth ground.

STEP 3: Connect the NPort 5600 to a network. Use a standard

straight-through Ethernet cable to connect to a hub or switch.

When setting up or testing the NPort 5600, you might find it

convenient to connect directly to your computer’s Ethernet port. In

this case, use a cross-over Ethernet cable.

1 2

Inhaltsverzeichnis

Seite 1 - Installation Guide

– 1 – – 2 – – 3 – P/N: 1802056000211 NPort 5600 Series Quick Installation Guide Third Edition, November 2010 1. Overview Welcome to the Moxa NPo

Seite 2 - 7. Specifications

– 4 – – 5 – – 6 – www.moxa.com/support The Americas: +1-714-528-6777 (toll-free: 1-888-669-2872) Europe: +49-89-3 70 03 99-0 Asia-Pacific:

Kommentare zu diesen Handbüchern

Keine Kommentare

Moxa NPORT 5650-16-T Installationsanleitung Seite 1

Stöbern Sie online oder laden Sie Installationsanleitung nach Serielle Server Moxa NPORT 5650-16-T herunter. Moxa NPort 5650-16 Benutzerhandbuch

Inhaltsverzeichnis

Kommentare zu diesen Handbüchern

Moxa NPORT 5650-16-T Installationsanleitung Seite 1

Stöbern Sie online oder laden Sie Installationsanleitung nach Serielle Server Moxa NPORT 5650-16-T herunter. Moxa NPort 5650-16 Benutzerhandbuch

Inhaltsverzeichnis

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Serielle Server Moxa NPORT 5650-16-T