Moxa IOLOGIK W5340-T Bedienungsanleitung Seite 8
- Seite / 196
- Inhaltsverzeichnis
- LESEZEICHEN
Bewertet. / 5. Basierend auf Kundenbewertungen
ioLogik Cellular Micro RTU Controller Introduction
1-3
Unlike the static IP requirements of remote devices for Ethernet I/O with a traditional OPC server, Active OPC
Server and ioLogik products deliver the flexibility of using dynamic IP addresses. The ioLogik can connect
directly to the Active OPC Server instead of being polled, which makes dynamic IP configuration and WAN
Access of the cellular I/O possible. As far as traditional data acquisition applications are concerned, I/O devices
are not capable of using this approach. In addition, the flexibility of being able to connect through a firewall is
a useful feature.
Resolving the Dynamic and Private IP Issue with Active OPC
Server
Since Moxa’s Active OPC Server supports push technology, the Active Cellular Micro Controller family of
products creates a software-based gateway that makes communications easier. By using a static IP address
with the Active OPC Server, the Cellular I/O device can connect to the Cellular network and Active OPC Server
without needing to worry about the IP address issue. The topology is illustrated below:
The ioLogik W5300 is likely to get a different IP address from the carrier each time it is connected to a cellular
network. Active OPC Server plays the role of a cellular gateway by managing the ioLogik W5300’s IP. All remote
ioLogik W5300 devices automatically initiate communication with Active OPC Server regardless of whether
they use a public IP or private IP, and can be managed by one centralized Active OPC Server, which itself has
a static IP address. Therefore, all I/O data can be read or written through one, powerful cellular device gateway
for IP address management.
The ioLogik W5300 allows you to use a variety of methods to connect with your application software, including
Modbus protocol, OPC Client/Server protocol, and SNMP protocol, and you can send alarms by TCP/UDP, SMS,
and email. For example, if you are using a SCADA application to monitor your system, you can use OPC
Client/Server protocol.
Internet
GPRS/EDGE/3G/
HSDPA
Network
Active OPC Server
with Fixed IP
Host
Actively Registering with an Active OPC Server
- User’s Manual 1
- Table of Contents 3
- Introduction 6
- Quick Start Guide 7
- Architecture 7
- Product Features 10
- Appearance 10
- Package Checklist 11
- Product Selection Guide 12
- Product Specifications 12
- Getting Started 17
- Before Testing 18
- Laboratory Testing 19
- Configuring the DIO Channels 23
- Digital Output (Sink Type) 24
- Testing the I/O Device 25
- DIN Rail / Wall Mounting 26
- Network 28
- Detailed instructions: 29
- IP Address 30
- Export System Config 31
- Import System Config 31
- Utility: ioAdmin 32
- Features of ioAdmin 33
- Main Screen Overview 34
- Menu Bar 34
- Menu Bar: File 34
- Menu Bar: System 35
- Menu Bar: Sort 38
- Quick Links 38
- Menu Bar: Help 39
- Navigation Panel 40
- Main Window 41
- Server Info Panel 41
- Sync. rate status 42
- Status bar 42
- Server Settings Panel 43
- LAN Settings Panel 44
- I/O Configuration Panel 45
- Configuring Virtual Channels 47
- Configuring DIO Channels 49
- Counter Scaling 50
- Relay Count Monitoring 52
- Testing DI and DO Channels 53
- I/O Expansion Panel 54
- Active Tags Panel 57
- Active OPC: Redundancy Mode 58
- Heartbeat Interval 58
- Read/Write Privilege 59
- Active Tags 59
- Cellular Settings Panel 61
- Caller IDs 62
- Operation Mode Setting 62
- DDNS Settings 63
- Port Forwarding 64
- General Settings 65
- Manual Key/ESP 66
- ISAKMP/PSK 67
- Cellular Reconnection 68
- Meter/Sensor 70
- Network Statistics 71
- Watchdog Panel 72
- Click&Go Logic Panel 72
- Click&Go Logic 74
- Overview 76
- Click&Go Logic Basics 77
- Working with Rules 78
- I/O Configuration 79
- Analog Input Mode Selection 81
- Alias Name Configuration 81
- Testing the I/O Channels 82
- Defining Global Variables 83
- SNMP Trap Server 84
- E-Mail Server 84
- Active Message Server 86
- SMS Phone Book 86
- Working/Off Working Days 87
- FTP Settings 87
- Data Logging Profile List 88
- Working with Logic 91
- IF “A” THEN “B”, ELSE “C” 92
- IF Conditions 93
- Virtual Channel 95
- Relay (Counter) 95
- Schedule 97
- System Start-up 98
- THEN/ELSE Actions 100
- Counter 101
- Pulse Output 102
- Relay (Counts) 103
- Internal Register (Integer) 104
- SNMP Trap 105
- Active Message 105
- ATTENTION 105
- Short Message Service 107
- Data Log Start/Stop 108
- FTP Service 109
- Activating the Rule-set 110
- Import/Export Configuration 110
- Planning and Assistance 112
- Internet 120
- Statistics 122
- Log Profile Creation 124
- Log File upload with FTP 126
- Connecting to a SCADA System 130
- Setup Procedure 132
- Wake on Call 139
- Pin-outs and Cable Wiring 141
- Pinouts 142
- Cable Wiring 144
- Digital Output Sink Mode 145
- Relay Output 145
- Analog Input 145
- SMS Commands 146
- SMS Command Syntax: 147
- SMS Command Table 147
- Local I/O Commands: 148
- Expansion I/O Commands: 149
- Option Commands: 150
- Modbus/TCP Address Mappings 151
- Modbus Mapping 152
- Factory Default Settings 192
- Connection 194
- Cellular modem error codes: 195
- Service delay time 196
Verwandte Produkte und Handbücher für Mobilfunknetzgeräte Moxa IOLOGIK W5340-T
(105 Seiten)© 2020, manymanuals.de. Alle Rechte vorbehalten. | 0.171 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Kommentare zu diesen Handbüchern