Moxa AWK-3121-EU Installationsanleitung

 2010 Moxa Inc. All rights reserved. Reproduction without permission is prohibited. P/N: 1802031210013 AWK-3121 Quick Installation Guide

RS-232 Connection The AWK-3121 has one RS-232 (8-pin RJ45) console port located on the front panel. Use either an RJ45-to-DB9 or RJ45-to-DB25 cable t

LED Indicators The front panel of the Moxa AWK-3121 contains several LED indicators. The function of each LED is described in the table below. LED Co

Specifications WLAN Standards IEEE 802.11a/b/g for Wireless LAN IEEE 802.3u 10/100BaseT(X) for Ethernet LAN IEEE 802.3af for Power-over-Ethernet I

RX Sensitivity (for hardware revision 1.0 and 1.1): 802.11b: -92 dBm @ 1 Mbps, -90 dBm @ 2 Mbps, -88 dBm @ 5.5 Mbps, -84 dBm @ 11 Mbps 802.11g: -87

- 14 - ATTENTION The AWK-3121 is NOT a portable mobile device and should be located at least 20 cm away from the human body. The AWK-3121 is NOT d

Overview Moxa’s AWK-3121 Access Point/Bridge/AP Client is ideal for applications that are hard to wire, too expensive to wire, or use mobile equipme

Step 4: Use the web-based manager to configure AWK-3121 Open your computer’s web browser and then type http://192.168.127.253 in the address field to

the first AWK-3121 connected to notebook A, and change the second or third AWK-3121 connected to notebook B to Client mode and then configure the not

Mounting Dimensions (unit = mm) 105.00 [4.13"]134.00 [5.28"]135.00 [5.31"]45.80 [1.80"]52.98 [2.09"]198.50 [7.81"] DIN-

Wall Mounting (optional) For some applications, it may be more convenient to mount the AWK-3121 to a wall, as illustrated below. STEP 1: Remove the a

WARNING Safety First! Calculate the maximum possible current in each power wire and common wire. Observe all electrical codes dictating the maximum

Wiring the Redundant Power Inputs The top two pairs of contacts of the 10-contact terminal block connector on the AWK-3121’s top panel are used for t

Cable Holder Installation (Optional) You can attach the cable holder to the bottom of the AWK-3121. This helps to keep cabling neat and avoid acciden