Moxa IOLOGIK E4200 Bedienungsanleitung Seite 35
- Seite / 105
- Inhaltsverzeichnis
- LESEZEICHEN
Bewertet. / 5. Basierend auf Kundenbewertungen
ioLogik Active Ethernet I/O Family User’s Manual Utilities
3-11
Adaptor Settings Tab (General)
The Adaptor Settings tab is where you log in as an administrator. This is required in order to gain
access to the ioLogik E4200 configuration options. If no administrator password has been set up,
simply click on Login and leave the Password field blank. Additional detail is provided later in this
chapter.
Message Monitor Tab
The Message Monitor tab will display any TCP/UDP I/O messages received from the ioLogik
E4200. When you install the ioLogik E4200 for the first time, the Active I/O messaging ruleset
will not have been defined yet, so there will be no messages in the Message Monitor Tab. Please
refer to Chapter 5 for information on how to program the ioLogik E4200’s Active I/O messaging
system.
Once the active I/O messaging system has been configured and activated, TCP/UDP messages sent
from the ioLogik E4200 will be viewable in the Message Monitor tab.
Messages can be displayed in ASCII, UNICODE or in HEX. To display messages in HEX, make
sure that “Toggle HEX” is checked. To display messages in UNICODE, make sure that
“UNICODE (UCS-2)” is checked.
Administrator Functions
For full access to all configuration options, log in as an administrator in the Adaptor Settings tab.
This is required whenever you start up ioAdmin or boot up/restart the ioLogik E4200. When you
install the ioLogik E4200 for the first time, the password will be blank and you may simply click
on Login.
Additional functions will be available after logging in, including the following new tabs:
z Network
z Firmware Update
z Click&Go Logic
z Watchdog
z Active Tags
ATTENTION
You must log in to access any administrator function, including Network, Communication
Watchdog Timer, and Firmware Update tabs. If you forget the password, you may hold down the
ioLogik’s reset button to clear the password and load factory defaults. This will result in the loss
of all configuration settings and your Click&Go Logic Active I/O messaging program!
When making configuration changes, you will need to click on Update or on Apply to save the
changes. Some changes will require a restart of the ioLogik I/O system in order to take effect, and
you will be given the option to restart the computer if necessary.
- User’s Manual 1
- Table of Contents 3
- Introduction 5
- Traditional Remote I/O 6
- Active Ethernet Modular I/O 6
- Product Features 7
- Package Checklist 8
- Product Specifications 8
- Dimensions 10
- Hardware Reference 12
- Hardware Specifications 13
- Initial Setup 15
- System Architecture 16
- 20
- Connecting the Power System 22
- Connecting to the Network 23
- Utilities 25
- Features of Modular ioAdmin 26
- Getting Starting 27
- Functions on Menu Bar 31
- Navigation Panel 33
- Server Context Menu 33
- Quick Links 34
- Main Window (General) 34
- Administrator Functions 35
- Modbus Address 36
- I/O Status 36
- Power on Settings 37
- Safe Status Settings 37
- Test I/O 38
- Network Tab (Administrator) 40
- Watchdog Tab (Administrator) 41
- Active Tags (Administrator) 42
- Using ioEventLog 46
- Basic Functions 47
- Main Menu 47
- Connection 48
- Overview for ioLogik E4200 50
- Entering the Web Console 51
- Overview 51
- Basic Settings 52
- Network Settings 52
- Ethernet Configuration 53
- Route Table 53
- I/O Module 54
- System Management 55
- SNMP Agent 56
- Network Connection 56
- Firmware Update 57
- Import System Config 57
- Change password 58
- Load Factory Default 59
- Save/Restart 59
- Click&Go Introduction 60
- Features 62
- Click&Go Logic Basics 62
- Working with Rules 63
- Define Global Variables 64
- Internal Register Settings 65
- Timer Settings 66
- SNMP Trap Server 66
- E-Mail Server 67
- Active Message Settings 68
- SMS Phone Number Book 68
- IF/THEN/ELSE Statement 69
- THEN/ELSE Actions 71
- SNMP Trap 73
- Active Message 74
- CGI Command 75
- Short Message Service (SMS) 75
- Activating the Ruleset 76
- Ruleset Management Bar 76
- Ruleset Import/Export 77
- Pinouts and Cable Wiring 78
- Using Modbus/TCP 79
- Fixed mode (default mode): 89
- Dynamic mode: 90
- Module Configuration Map 90
- DO Module Configuration Map: 91
- DI Module Configuration Map: 91
- AO Module Configuration Map: 92
- AI Module Configuration Map: 92
- TC Module Configuration Map: 93
- Internal Registers 94
- Function 8 94
- CGI Commands 95
- Used Network Port Numbers 97
- SNMP MIB File 98
- Factory Default Settings 103
- Appendix G. FCC 105
© 2020, manymanuals.de. Alle Rechte vorbehalten. | 1.822 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Kommentare zu diesen Handbüchern