Moxa IOLOGIK E4200 Bedienungsanleitung Seite 6
- Seite / 105
- Inhaltsverzeichnis
- LESEZEICHEN
Bewertet. / 5. Basierend auf Kundenbewertungen
ioLogik Active Ethernet I/O Family User’s Manual Introduction
1-2
ioLogik Active Ethernet Modular I/O System Overview
The ioLogik Active Ethernet modular I/O family of slice-type network I/O products can connect
sensors and on/off devices in any combination and can transfer the captured data or device status
to a host computer via an Ethernet or IP-based network.
ioLogik Active Ethernet modular I/O products consist of two main parts: the network adaptor and
I/O modules. The network adaptor provides system and field power to connected I/O modules. Up
to 16 I/O modules can be connected to one network adaptor.
Network I/O expansion modules up to 16 slots
Adaptor (Up to 256 DIOs or 64 AIOs)
Traditional Remote I/O
Remote Ethernet modular I/O solutions have been on the market for a long time. Traditional
solutions are “passive,” in the sense that I/O devices wait passively to be polled by a host computer.
The response time in this type of setup, however, tends to be on the order of seconds. The
“passive” remote modular I/O structure is inadequate for data acquisition and control systems that
require an efficient, real-time I/O solution with a response time on the order of hundredths of
seconds.
Active Ethernet Modular I/O
Moxa’s Active Ethernet modular I/O solutions were developed specifically to address the
limitations of the traditional passive approach. With the passive approach, the host computer polls
the I/O device over the network for the status of each I/O device. With the active approach, the
Active Ethernet modular I/O product intelligently sends the host computer status information only
when specified events occur. Using push technology, the ioLogik I/O device greatly reduces the
load on the CPU and network resources. Far fewer network packets are required and in general the
packets are smaller in size since I/O information is only sent when needed, and only information
from the specified I/O device is sent.
Moxa’s active I/O messaging system uses TCP or UDP for I/O messaging and supports sending
messages to up to ten host computers simultaneously. In addition to providing intelligent status
reporting, Active Ethernet I/O products are backwards compatible, with all of the functions and
capabilities of traditional passive remote I/O products.
- User’s Manual 1
- Table of Contents 3
- Introduction 5
- Traditional Remote I/O 6
- Active Ethernet Modular I/O 6
- Product Features 7
- Package Checklist 8
- Product Specifications 8
- Dimensions 10
- Hardware Reference 12
- Hardware Specifications 13
- Initial Setup 15
- System Architecture 16
- 20
- Connecting the Power System 22
- Connecting to the Network 23
- Utilities 25
- Features of Modular ioAdmin 26
- Getting Starting 27
- Functions on Menu Bar 31
- Navigation Panel 33
- Server Context Menu 33
- Quick Links 34
- Main Window (General) 34
- Administrator Functions 35
- Modbus Address 36
- I/O Status 36
- Power on Settings 37
- Safe Status Settings 37
- Test I/O 38
- Network Tab (Administrator) 40
- Watchdog Tab (Administrator) 41
- Active Tags (Administrator) 42
- Using ioEventLog 46
- Basic Functions 47
- Main Menu 47
- Connection 48
- Overview for ioLogik E4200 50
- Entering the Web Console 51
- Overview 51
- Basic Settings 52
- Network Settings 52
- Ethernet Configuration 53
- Route Table 53
- I/O Module 54
- System Management 55
- SNMP Agent 56
- Network Connection 56
- Firmware Update 57
- Import System Config 57
- Change password 58
- Load Factory Default 59
- Save/Restart 59
- Click&Go Introduction 60
- Features 62
- Click&Go Logic Basics 62
- Working with Rules 63
- Define Global Variables 64
- Internal Register Settings 65
- Timer Settings 66
- SNMP Trap Server 66
- E-Mail Server 67
- Active Message Settings 68
- SMS Phone Number Book 68
- IF/THEN/ELSE Statement 69
- THEN/ELSE Actions 71
- SNMP Trap 73
- Active Message 74
- CGI Command 75
- Short Message Service (SMS) 75
- Activating the Ruleset 76
- Ruleset Management Bar 76
- Ruleset Import/Export 77
- Pinouts and Cable Wiring 78
- Using Modbus/TCP 79
- Fixed mode (default mode): 89
- Dynamic mode: 90
- Module Configuration Map 90
- DO Module Configuration Map: 91
- DI Module Configuration Map: 91
- AO Module Configuration Map: 92
- AI Module Configuration Map: 92
- TC Module Configuration Map: 93
- Internal Registers 94
- Function 8 94
- CGI Commands 95
- Used Network Port Numbers 97
- SNMP MIB File 98
- Factory Default Settings 103
- Appendix G. FCC 105
© 2020, manymanuals.de. Alle Rechte vorbehalten. | 1.905 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Kommentare zu diesen Handbüchern