Moxa TCC-120 Betriebsanweisung PDF herunterladen (Seite 17)

Installation

TCC-120/120I User’s Guide 2-5

STEP 4: Test the Connection

After setting the DIP Switches, connecting the power, and wiring the

terminal block, we suggest using a Console Terminal program, such as

HyperTerminal or Moxa Terminal Emulator, to test the connection. If

you have an RS-422/485 serial board (such as Moxa Industio CP-132)

installed on your PC, you can connect your PC’s COM port to one of

the TCC-120/120I’s RS-422/485 terminal blocks, and connect the

TCC-120/120I’s other RS-422/485 terminal block to one of the

RS-422/485 serial board’s ports. Next, start HyperTerminal or Moxa

Terminal Emulator, and then open a connection to the COM port, and

to the port associated with the TCC-120/120I’s RS-422/485 port.

Simply type a few characters on your PC’s keyboard. The characters

you type should show up in the HyperTerminal window that is

currently inactive, indicating that the typed characters were

transmitted between the TCC-120/120I’s two RS-422/485 ports.

1 2 ... 12 13 14 15 16 17

Keine Kommentare

Moxa TCC-120 Betriebsanweisung Seite 17