Moxa CP-138U-I-T Bedienungsanleitung PDF herunterladen (Seite 114)

Universal PCI Board User’s Manual Driver Installation: Non Windows

9-7

SCO

y SCO OpenServer 5

y SCO OpenServer 6

y SCO UnixWare 7

Follow the steps given in this section to install the SCO OpenServer 5/6 & SCO UnixWare 7 driver.

The installation procedures for SCO UnixWare 7 and SCO OpenServer 5/6 are similar.

1. Copy the driver file .tar to your host.

2. #tar xvf <driver tar file>

#/tmp/moxa/mxinstall

3. The window shown below will open next. Press RETURN to continue.

=============================================================

Moxa Smartio/Industio Family Device Driver Installation (Ver. 1.11)

=============================================================

For SCO UnixWare 7

Tar files, please wait.....O.K.

Press RETURN to continue

4. <Note: If your environment is SCO OpenServer 5/6, you can skip step 4 & 5>

When you see the screen below, select “Esc” to exit and reboot your computer.

MOXA Smartio/Industio Family Installation Utility (Ver 1.11)

Smartio/Industio Family Basic Configuration

Board No. Board Type I/O Address Interrupt Bus/Dev No.

1 None ------------ ------------ ------------

2 None ------------ ------------ ------------

3 None ------------ ------------ ------------

4 None ------------ ------------ ------------

PgDn: getty Setting

Enter: Confirm Input Value

Esc: Exit

Tab: Change Item

1 2 ... 109 110 111 112 113 114 115 116 117 118 119 ... 140 141

Keine Kommentare

Moxa CP-138U-I-T Bedienungsanleitung Seite 114