Moxa AWK-5222-EU Bedienungsanleitung PDF herunterladen (Seite 55)

100

AWK-5222 User’s Manual Other Console Configurations

3-37

Forwarding delay

Setting Description Factory Default

Numerical value input

by user

(4 – 30 seconds)

The amount of time this device waits before

checking to see if it should change to a different

topology.

15 (seconds)

Max. age

Setting Description Factory Default

Numerical value input

by user

(6 – 40 seconds)

As a non-root role, if the device has not

received a hello message from the root longer

than Max. age, it will reconfigure itself as a

root. Once two or more devices on the network

are recognized as a root, the devices will

renegotiate to set up a new Spanning Tree

topology.

20 (seconds)

Enable RSTP

Setting Description Factory Default

Enable/ disable Enables or disables the port as a node on the

Spanning Tree topology.

Disable

(unchecked)

Port priority

Setting Description Factory Default

Numerical value

selected by user

Increase this port’s priority as a node on the

Spanning Tree topology by inputting a lower

number.

128

Port cost

Setting Description Factory Default

Enable/ Disable Input a higher cost to indicate that this port is

less suitable as a node for the Spanning Tree

topology

2000000

Edge port

Setting Description Factory Default

Checked/ unchecked Sets a port, which no BPDU expectedly goes

through, as an edge port

unchecked,

except WLAN1/2

ports

NOTE

We recommend you set an edge port for the port, which is connected to a non-STP/RSTP

sub-network or an end device (PLC, RTU, etc.) as opposed to network equipment. This can

prevent unnecessary waiting and negotiation of STP/RSTP protocol, and accelerate system

initialization. When an edge port receives BPDUs, it can still function as an STP/RSTP port and

start negotiation.

Setting an edge port is different from disabling STP/RSTP on a port. If you disable STP/RSTP, a

port will not deal with STP/RSTP BPDUs at all.

Port Status

Port Status indicates the current Spanning Tree status of this port. Use Forwarding for normal

transmission, or Blocking to block transmission.

1 2 ... 50 51 52 53 54 55 56 57 58 59 60 ... 99 100

Kommentare zu diesen Handbüchern

Keine Kommentare

Moxa AWK-5222-EU Bedienungsanleitung Seite 55

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für WLAN-Zugangspunkte Moxa AWK-5222-EU