Moxa DA-681-I-DP-CE Bedienungsanleitung PDF herunterladen (Seite 29)

DA-681 Series Hardware User’s Manual Hardware Installation

Upgrading the Memory Module

The DA-681 embedded computer supports one 200-pin DDR2 400/533 SODIMM module, up to 1

GB. One DDR2 SDRAM memory module is pre-installed. To upgrade the DDR2 SDRAM

memory module, follow these instructions:

1. Disconnect the DA-681 from the power source.

2. The DA-681’s memory module is located inside the DA-681. Use a screwdriver to remove the

screws on the top cover of the DA-681.

3. After removing the memory module cover, you will see the DDR2 SDRAM module.

However, DDR2 SDRAM memory has been installed already. To upgrade the memory, you need

to remove the original memory by pushing two clutches at both sides of the module.

2-16

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 56 57

Keine Kommentare

Moxa DA-681-I-DP-CE Bedienungsanleitung Seite 29