Moxa DA-681-I-DP-CE Bedienungsanleitung PDF herunterladen (Seite 42)

DA-681 Series Hardware User’s Manual BIOS Setup

DVMT Mode

Setting the DVMT operating mode. When set to “Fixed,” the graphics driver will reserve a fixed

portion of the system memory as graphics memory. When set to “DVMT,” the graphics driver will

dynamically allocate system memory as graphics memory, according to system and graphics

requirements. When set to “BOTH,” the graphics driver will allocate a fixed amount of memory as

dedicated graphics memory, as well as allow more system memory to be dynamically allocated

between the graphics processor and the operating system.

Options: FIXED, DVMT (default), BOTH

DVMT/FIXED Memory Size

Sets the maximum amount of system memory that can be allocated as graphics memory.

Options: 64 MB, 128 MB (default).

PnP/PCI Configurations

Init Display First

This item allows you to decide whether the PCI interface or onboard graphic chip is activated first.

Options: PCI (default), Onboard

Resources Controlled By

The BIOS can automatically configure all boot and Plug and Play compatible devices. If you

choose Auto, you will not be able to assign IRQ and memory base address fields manually, since

the BIOS assigns them automatically.

Options: Auto (default), Manual

IRQ Resources

When resources are controlled manually, you can assign each system interrupt to Reserved or PCI

device. This is only configurable when “Resources Controlled By” is set to “Manual.”

Options: IRQ 3, 4, 5, 7, 10, 11 for PCI device.

3-8

1 2 ... 37 38 39 40 41 42 43 44 45 46 47 ... 56 57

Keine Kommentare

Moxa DA-681-I-DP-CE Bedienungsanleitung Seite 42